power entry modules without line filter 062 www.schurter.com/pg0 5 connectors iec appliance inlet c14 or c18 with fuseholder 1-pole 1062: design 1 + 2 equipment class 1 1062: design 6 + 7 equipment class 1 c14 70 c description - panel mount: screw-on from front side, appliance inlet, protection class i or ii, fuse - holder for fuse-links 5 x 20 mm - solder terminals or quick connect terminals approvals - ul license number: e88880 - csa license number: 1084381 characteristics - the fuse drawer "fingergrip" can be removed by hand the fuseholder is accessible from the equipment front references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 10 a / 250 vac; 60 hz dielectric strength > 3 kvac between l-n > 1.5 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 20 acc. to iec 60529 protection class suitable for appliances with protection class 1 or 2 acc. to iec 61140 terminal solder terminals or quick connect ter - minals material: housing ul 94v-0 appliance inlet c14 acc. to iec/en 60320-1 ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 or 2 fuseholder 1 or 2 pole, acc. to iec 60127-6, for fuse-links 5 x 20 mm power acceptance @ ta > 23c admissible power acceptance at hig - her ambient temperature see derating curves dimensions 44 mm 37 1.2 50 40 33 28 16.5 5 3 19.7 ? 3.2 33 31 r 0.5 r 0.5 33.2 +0.2 - 0 33.2 +0.2 - 0 40 r <2 lenght of the terminal please find at the order code configuration table
2 power entry modules without line filter 062 www.schurter.com/pg0 5 connectors 33 31 31.3 44 28 36 27 3 5 19.7 ? 3.2 27.2 +0.2 - 0 31.5 +0.2 - 0 36 r <4 r 2.5 lenght of the terminal please find at the order code configuration table
power entry modules without line filter 062 www.schurter.com/pg0 5 connectors config. code product configurato r 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | the characters are placeholders for the correspondingly keys of selections from the key tables. 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = type type configuration key protection class 2 b protection class 1 x 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = terminals terminal l configuration key connection to fuse holder b 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = terminals terminal n configuration key short solder terminal (l=4,8mm) 2 long solder terminal (l=8,5mm) 3 blade terminal (4,8x0,8mm) 8 blade terminal (6,3x0,8mm) 9 connection to fuse holder b symbols similar as in table a 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = terminals terminal ground configuration key without terminal 0 short solder terminal (l=4,8mm) 2 long solder terminal (l=8,5mm) 3 blade terminal (4,8x0,8mm) 8 blade terminal (6,3x0,8mm) 9 symbols similar as in table a 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = terminal fuseholder terminal fuseholder configuration key solder terminal 1 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = color color configuration key jet black; ral9005 a silver grey; ral7001 b pure white; ral9010 d standard color: black 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = style style configuration key flange with countersunk holes 1 flange with through holes 2 flange with countersunk holes (special type) 6 flange with through holes (special type) 7 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = dimension x dimension "x" configuration key 00 the dimension "x" is dispalyed in ( 1 / 10 mm). this information is also valid for the order code 1062 | - | h | - | a | b | c | n | - | d | - | e | g | o | = features features configuration key dead cover 1 holder for 1 or 2 fuses (text legible, when inlet on top) 4 holder for 1 or 2 fuses (text legible, when inlet on bottom) 5
power entry modules without line filter 062 www.schurter.com/pg0 5 connectors variants config. code description order number 1062-x-b221-a-6004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: short solder terminal (l=4,8mm), ground: short solder terminal (l=4,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes (special type), dimension x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), not used 4304.6011 1062-x-b331-a-1004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: long solder terminal (l=8,5mm), ground: long solder terminal (l=8,5mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimension x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), 4304.6012 1062-x-b881-a-1004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: blade terminal (4,8x0,8mm), ground: blade terminal (4,8x0,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimen - sion x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), 4304.6013 1062-x-b991-a-1004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: blade terminal (6,3x0,8mm), ground: blade terminal (6,3x0,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimen - sion x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), 4304.6014 1062-x-bb21-a-1004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: connection to fuse holder, ground: short solder terminal (l=4,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimen - sion x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), 4304.6015 1062-x-bb21-a-1005 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: connection to fuse holder, ground: short solder terminal (l=4,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimen - sion x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on bottom), 4304.6016 1062-x-bb21-a-6004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: connection to fuse holder, ground: short solder terminal (l=4,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes (special type), dimension x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), not used 4304.6017 1062-x-bb31-a-1004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: connection to fuse holder, ground: long solder terminal (l=8,5mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimen - sion x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), 4304.6018 1062-x-bb81-a-1004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: connection to fuse holder, ground: blade terminal (4,8x0,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimension x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), 4304.6019 1062-x-bb91-a-1004 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: connection to fuse holder, ground: blade terminal (6,3x0,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimension x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on top), 4304.6020 1062-x-bb91-a-1005 1062, iec power entry module c14, 70c, version: 1 or 2, l: connection to fuse holder, n: connection to fuse holder, ground: blade terminal (6,3x0,8mm), fuseholder: solder terminal, color: jet black; ral9005, design: flange with countersunk holes, dimension x: 00, features: holder for 1 or 2 fuses (text legible, when inlet on bottom), 4304.6021 the listet variants should be available from stock other versions on request www.schurter.com/contac t packaging unit 200 pcs accessorie s description assorted cover s rear cover mating outlets/connector s category / description appliance outlet overview complet e iec appliance outlet f, screw-on mounting, front side, solder or quick-connect terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outlet further types to 106 2
5 power entry modules without line filter 062 www.schurter.com/pg0 5 connectors connector overview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connector further types to 106 2 ... power cord overview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cord further types to 106 2 ... power supply or interconnection cord overview complet e divers power supply and interconnection cords 10 a 6000.021 4 divers power supply and interconnection cords 10 a 6000.022 4 divers power supply and interconnection cords 10 a 6003.020 4 divers power supply and interconnection cords 10 a 6003.020 5 divers power supply and interconnection cords 10 a 6003.021 5 power supply or interconnection cord further types to 106 2 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
